The URL can be used to link to this page

00310 - Equipment Specifications - SWS Equipment PO Box 13040 • Spokane, WA 99213-3040 (509) 533-9000 • Fax (509) 533-1050 • 1 (800) 892-7831 www.SWSequipment.com WA Contractor’s License: SOLIDWS038JZ • ID Contractor’s License: RCE-17173 • MT License: E1240143 • OR License: 325016-94 City of Kalispell 201 1st Avenue East P.O. Box 1997 Kalispell, Montana 59903-1997 RE: (1) New 28 Yard Front-load Solid Waste Truck SWS Equipment is presenting the following for the above referenced bid: Primary Bid: Curbtender Titan 40 cu. yd. w/Peterbilt 520 9L - $395,546.00 With the following two alternate bid options: (1) Option #1 Wittke Starlight 40 cu. yd. w/Peterbilt 520 11L - $397,300.00 SWS STOCK #230042 – IN STOCK – Ready to Deliver (2) Option #2 Curbtender Titan 40 cu. yd. w/Peterbilt 520 11L - $404,237.00 Roger Beatty Territory Manager Montana SWS Equipment, LLC. PO Box 13040 | Spokane, WA 99213 Phone: (509)533-9000 | Direct: (406)560-3100 Primary Bid Curbtender Titan w/ Peterbilt 520 9L $395,546.00 PRIMARY BID PRIMARY BID PRIMARY BID PRIMARY BID PRIMARY BID PRIMARY BID PRIMARY BID PRIMARY BID PRIMARY BID 701 PERFORMANCE DRIVE | CEDAR FALLS, IA 50613 PHONE: (319) 266-1721 | FAX: (319) 266-8207 © 2024 Curbtender, Inc. All Rights Reserved. Specifications subject to change.www.curbtender.com TITAN Armed For Success High Compaction Heavy Duty PRIMARY BID www.curbtender.com Body Capacity 40yd3 44yd3 A. Body Length 309”318” B. Length of Body to Tailgate Raised 375”375” C. Height of Body Above Chassis Frame 111”111” D. Height of Tailgate Raised Above Chassis Frame 195”195” E. Length of Body With Arms Down W/ Forks Stowed 423”433” F. Length Of Body With Arms Down W/ Forks Extended 470”480” G. Height Above Chassis Frame Arms Up W/ Forks Stowed 121”121” H. Height Above Chassis Frame Arms Up W/ Forks Extended 179”179” J. Appx. Overall Length (Rear Tailgate To Chassis Front Bumper)398”407” Hopper Capacity 12yd3 12yd3 Body Weight 17,360 LBS.17,720 LBS. BODY SPECIFICATIONS Standard Performance • Pack Panel Cycle: 25 Seconds • Full Ejection of Packed Material: 31 Seconds• Arm Cycle: 16 Seconds• Tailgate Opening: 16 Seconds• 1,000 LBS./yd3 Compaction Body Construction • Body Sides:10 Gauge ASTM 715-80• Body Roof: 10 Gauge ASTM 715-80• Body Curved Floor: 3/16” Hardox 450• Hopper Sides: 3/16” Hardox 450• Hopper Floor: 1/4” Hardox 450• Tailgate Construction: 10 Gauge ASTM A715-80 • Hopper Wind and Front Screen• Sliding Doors (32”)• Full Eject Design• Cab Shield With Hinged Extension• Roof Access Ladder (Curbside) Packing Panel • Lower Face: 1/4” 100,000 PSI • Upper Face: 3/16” ASTM A715-80100,000 PSI Arms and Forks • Bolt-On Arms, Load Rated 8,000 LBS. (4.5” Cylinders)• Torque Tube Bearings: (4) Split Bearings Blocks w/ Bronze Bushings Bushings • Forks: ASTM A514 at 1 ½” x 43” Long Forks• Automatic “Up Arm” Deceleration Valve Hydraulics • Air Over Hydraulic Controls • Pump: 55 GPM @ 1,500 RPM• Reservoir Capacity: 50 Gal.• Suction Strainer: 100 Mesh• Return Filter: 10 Micron• System Working Pressure: 2,500 PSI Max• Under Body Hydraulic Valves• Pump Fluid Stop Blocks Standard Optional Features • Body Sides: 7 Gauge or 1/8” Hardox• Residential, Short, Or Long Forks• Residential Carry Can• 10,000 LBS. Load Rated Arms• “Cardboard Special” Package – 6.25” Bore Pack Cylinders 701 PERFORMANCE DRIVE | CEDAR FALLS, IA 50613 PHONE: (319) 266-1721 | FAX: (319) 266-8207 © 2024 Curbtender, Inc. All Rights Reserved. Specifications subject to change. A C D E F H B G J Minimum GVWR 66,000 LBS.66,000 LBS. Front Axle 20,000 LBS.20,000 LBS. Rear Axle 46,000 LBS.46,000 LBS. Cab to Trunnion 210”210” MINIMUM CHASSIS REQUIREMENTS FRONT LOADERTITANPRIMARY BID STANDARD NEW EQUIPMENT 1 YEAR LIMITED WARRANTY This Warranty is Non-Transferable Revised 11/2017 Curbtender, Inc. (“CURBTENDER”) warrants that the goods purchased (the “Unit”) shall be free from defects in material and workmanship under normal use for a period one year from the date of sale, beginning when the Unit is delivered to the initial owner (the “Warranty”). Warranty shall be approved only when proper service and maintenance are performed as described and required in CURBTENDER Service Bulletins and CURBTENDER Operator, Service and Parts manuals and the then current CURBTENDER Warranty Policy and Procedures are followed. Failure to comply with the then current CURBTENDER Warranty Policy and Procedures may, at CURBTENDER’s discretion, invalidate this Warranty in its entirety or invalidate any individual warranty claim. This Warranty is expressly limited to the repair or replacement of any component or part that is proven to CURBTENDER’s satisfaction to have been defective in material or workmanship. Such components or parts shall be repaired or replaced without cost. Curbtender’s warranty does not include “wear items” such as (but not limited to) bearings, bushings, steel liners, guide shoes, belts, pins, etc. Any service parts sold by CURBTENDER shall carry a ninety (90) day limited warranty for replacement only (labor is not included), provided that a factory inspection reveals a material or workmanship defect. CURBTENDER reserves the right to make changes in the design or make additions to or improvements on its product without creating any obligation for installation in previously manufactured units. THE WARRANTY SET FORTH HEREIN IS THE SOLE AND EXCLUSIVE WARRANTY BEING GIVEN BY CURBTENDER WITH RESPECT TO THE UNIT AND ANY RELATED PARTS OR PRODUCTS AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGMENT ARE HEREBY DISCLAIMED. THE REMEDIES PROVIDED IN THIS WARRANTY ARE THE EXCLUSIVE REMEDIES AVAILABLE AND ARE LIMITED TO REPAIR AND REPLACEMENT OF THE NONCONFORMING PARTS. IN NO EVENT, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING BUT NOT LIMITED TO NEGLIGENCE, PRODUCT LIABILITY, OR STRICT LIABILITY, SHALL CURBTENDER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFITS, PRODUCTS, DOWN TIME, COVER, TEMPORARY REPLACEMENT COST OR ANY OTHER DIRECT, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING ATTORNEY’S FEES. IN NO EVENT SHALL CURBTENDER BE LIABLE FOR ANY LOSS, DAMAGE, CLAIM, COST OR EXPENSE, INCLUDING ATTORNEY’S FEES, ARISING FROM OR RELATED TO ANY LEAK OR SPILL OF HYDRAULIC FLUID OR ANY HAZORDOUS MATERIAL (AS DEFINED UNDER ANY APPLICABLE FEDERAL, STATE, OR LOCAL STATUTE, REGULATION OR THE LIKE) OR THE FAILURE TO PROPERLY DISPOSE OF HYDRAULIC FLUID OR ANY HAZORDOUS MATERIAL. OWNER AGREES TO DEFEND AND HOLD CURBTENDER HARMLESS FROM ANY LOSS, DAMAGE, CLAIM, COST OR EXPENSE, INCLUDING ATTORNEY’S FEES, ARISING FROM OR RELATED TO ANY ENVIRONMENTAL OR HAZORDOUS MATERIAL CLAIM. THIS WARRANTY IS CONTINGENT UPON AND APPLICABLE ONLY IF THE THEN CURRENT CURBTENDER WARRANTY POLICY AND PROCEDURES ARE COMPLIED WITH. OTHER THAN THE PURCHASE OF AN EXTENDED WARRANTY, NO EMPLOYEE OR REPRESENTATIVE OF CURBTENDER IS AUTHORIZED TO MODIFY THIS WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY. THIS IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED BY CURBTENDER. PRIMARY BID Alternate Option #1 Wittke Starlight w/ Peterbilt 520 11L $397,300.00 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 ALTERNATE OPTION #1 2003 Wittke Starlight™2005 Labrie Optimizer™ THE WITTKE TM HISTORY ALTERNATE OPTION #1 THE WITTKE™ HISTORY The Wittke™ name was established in western Canada through the 1980s and early 1990s, when Wittke gained market dominance as a manufacturer of commercial steel refuse containers from their base in Medicine Hat, Alberta, Canada. In the early 1990s Wittke™ developed a frontload refuse body called the Pegasus. Wittke continued to reﬁ ne the product, and in the mid 90s launched the most productive frontloader in the refuse industry; the Starlight™. Targeted specifically for California and the western region of the U.S. and Canada, the Starlight™ featured a light tare weight, steel weldments of high tensile strength and quick cycle times. Wittke™ quickly sold more than 5,000 Starlight™ bodies, establishing the product as the industry leader. The Superduty™ – a body speciﬁ cally designed for the stresses and pay- load requirements of the east coast market was then developed and introduced in the early 2000. Upon acquiring the Wittke product line in 2006, Labrie took advantage of it's own front-end loader design and combined the best features of both products, adding Hardox steel, and reintroducing the newly enhanced Wittke font-end loader to the market with the fastest and smoothest arm cycle in the industry. Labrie then integrated the best design features of the two body models, and incorporated the structural advantages provided by Hardox steel. “Our Wittke Starlight™ frontloaders have proven to be e cient, dependable workhorses and the Digiload scaling systems are very accurate and easy to use.” Jim McGurl Operations Manager-Collections Occupational Training Center of Burlington county “I test drove a front end loader made by Labrie. The arms run very smoothly and I did not have any trash, boxes or debris fall over behind packing blade the two days I drove this truck. I have 29 years in solid waste ﬁ eld and this is the best front end loader I have seen or drove.” Joe White, Operator City of Edmond, Oklahoma “At Veolia, our Wittke Starlights™ are the most cost e ective trucks in our frontloader ﬂ eet. With their lighter bodies, our Wittke™ allow us to pack more and extend our routes which save us time and money. The Digiload scale system is reliable, very accurate and the weigh in motion system saves us time.” Mario Gilbert, Waste Collection Manager Veolia ALTERNATE OPTION #1 Just because a frontloader needs to be rugged and strong doesn’t mean it needs to be heavy. The Wittke™ body is built using 100% Hardox steel. This means the weight that isn’t taken up in the body itself can be added to the payload. More waste in the payload means more cash in your pocket. Wittke™ frontloaders are strong and dependable. With the fastest and smoothest arm cycle in the industry, your operation will be fast and clean. The details incorporated into the Wittke™ design all contribute to decreased maintenance and ensure a solid, dependable frontloader that will last for years. Lower maintenance costs will also help your bottom line. ANYTHING IS POSSIBLE WITH WITTKE™ ALTERNATE OPTION #1 ALTERNATE OPTION #1 Wittke Starlight™ is known for its agility. Its low body weight maximizes the legal payload capacity and its fast lifting cycle ensures rapid loading on the route. The Starlight™ tackles both residential and commercial routes with ease and with its low body weight, you will be able to collect more material, providing the highest legal payload ever on each collection. 15,500 LBSSTARLIGHT™BODY WEIGHT 10,000 LBSLIFTING CAPACITY* 14 SEC. LIFTING CYCLE * Optional ALTERNATE OPTION #1 Wittke Superduty™ is as rugged as they get. The 100% Hardox steel body delivers ultimate strength at the lowest possible body weight. The Wittke SuperdutyTM is the toughest of all frontloaders; engineered to require nominal maintenance and providing the lowest total cost of ownership. 16,700 LBSSUPERDUTY™BODY WEIGHT 130,700 LBSPACKERCYLINDER FORCE 20 SEC. PACKING CYCLE 130,700 ALTERNATE OPTION #1 A high-quality product must be made from high-quality materials. Hardox 450 steel is strong yet light by design and has 5 times more abrasion resistance than mild steel. It is the ideal material to build a body that needs to be extremely rugged without giving up payload. Wittke™ o ers “Hardox in my body” certiﬁ ed frontloa- ders. Both the Starlight™ and Superduty™ bodies are built using single sheets of Hardox steel, eliminating the risk of cracks and corrosion. The benefit of building a body with such high-quality materials can result in an 8% average savings on maintenance costs alone and with Hardox 450 providing the greatest tensile strength and lightest weight in its class, Wittke™ frontloaders can also attain a minimum 5% higher legal payload. This allows the operator to extend his route and increase revenues and Hardox steel enables these frontloaders to perform under the most extreme conditions. "HARDOX IN MY BODY" CERTIFIED FRONTLOADERS CE R T I F IED CE R T I FIED R T I F IEDCERTIFIED CE R T I FIED ALTERNATE OPTION #1 Hydraulics provide the force behind any waste-collection vehicle. The Wittke™ hydraulic system has been carefully and thoughtfully engineered, right down to the corrosion-resistant zinc plating on the strategically placed hydraulic lines. Wittke™ delivers the smoothest lifting arm operation and the quickest cycle time in the industry. The packing cycle takes a mere 18 to 20 seconds and a complete arm cycle takes only 12 to 14 seconds, increasing productivity by a minimum of 20 minutes per day.* The high flow hydraulic pump and deceleration valves have been used in combination to achieve the fastest and smoothest cycle times in the industry and our unique "work-at-idle" feature allows for the quietest early morning collection with no sacriﬁ ce to speed or compaction. GET THE FASTEST CYCLE TIME WITH OUR POWERFUL HYDRAULIC DESIGN *based on a 8 hour shift HYDRAULIC DESIGNHYDRAULIC DESIGN ALTERNATE OPTION #1 DURASCOPE PACKER CYLINDERS* Packer cylinders operate in one of the harshest environments for all waste hauling equipment. Constantly exposed to debris that can penetrate the seal and contaminate the hydraulic system, these revolutionary cylinders are equipped with: ■ nitrated rods; ■ an enhanced seal conﬁ guration; ■ shavers that protect the cylinder from contamination. Durascope cylinders will reduce your maintenance costs by an average of 4%. These details may be hidden, but they are what make the Wittke™ stand out from the rest. TAILGATE AUTO-LATCH A tailgate that doesn’t require any vertical movement to lock and seal will prevent additional stress and damage to the tailgate seal and improve its longevity. The tailgate on the Wittke™ frontloaders closes straight down and locks without any added friction that may cause premature wear. Wittke™ uses a simple design that improves tailgate seal longevity. * Optional ALTERNATE OPTION #1 PLOW-SHAPED PACKER PANEL Debris should be directed into the body and not allowed to accumulate behind the packer. This is why the Wittke™ packer panel was designed with its innovative plow shape. The panel angles are more e cient and result in a 12% higher compaction ratio and 25% lower cleaning costs. CHROMIUM OVERLAY* If you want a truly low maintenance frontloader, the parts that receive the most wear need to be made from the strongest materials. That is exactly why we use packer panel wear shoes and tracks made with chromium overlay. These parts move hundreds of times per day, and a typical shoe and track set-up would need to be replaced every 4 to 5 years. However, with our chromium overlay package, these parts will last over the entire life span of the vehicle. The kind of detail we have put into the Wit- tke™ design is something you won’t ﬁ nd on any other frontloader in the industry today. CANOPY SWEEPER* Lower your risk of leaving debris along the route. With a second lifting of the arms, debris can be swept back into the hopper and not allowed to fall on the ground. The canopy sweeper not only increases the operator’s line of sight, but it can save at least 30 minutes per week of labor. Wittke™ frontloaders also have gutters strategically built into the canopies to direct the ﬂ ow of ﬂ uid into the hopper thus limiting spillage over the windshield and the cab. Your customers will appreciate both the cleanliness provided by the unique canopy sweeper and gutter system designs. * Optional ALTERNATE OPTION #1 COLLECT STRATEGICALLY WITH DIGILOAD* When it comes down to it, optimizing waste collection is a numbers game. How much waste is each customer producing? How much payload is available on the truck? The only way to know is by weighing. The DIGILOAD system has been designed to capture all the data you need without losing collection time and eliminating operator error. Strategically installed sen- sors detect the actual weight of the material in the waste bin while it is in motion. This system eliminates repetitive calibration and lets the operator focus on more important tasks. With DIGI- LOAD you will be able to: ■ calculate weight for each customer pick-up; ■ charge according to weight; ■ evaluate proﬁ tability; ■ optimize your payload; ■ organize your routes according to container weight. THE BENEFITS OF CHOOSING DIGILOAD OUTWEIGH THE COST: ■ OPTIMIZATION: Collect data to better manage routes ■ SEAMLESS OPERATION: ■ 98% accuracy for payload determination ■ Zero wait time to take a measurement ■ Eliminate operator error ■ INCREASED REVENUE: Improve proﬁ tability by determining customer usage ■ LOW MAINTENANCE: 10 times lower replacement sensor cost * Optional ALTERNATE OPTION #1 LABRIE CNG: DELIVERING A CLEANER WAY OF DOING BUSINESS SINCE 2001A CLEANER WAY OF DOING CNG With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You beneﬁ t from a trusted source of expertise when it comes to converting to CNG. THE BENEFITS OF CHOOSING CNG ARE HUGE: ■ AFFORDABLE : Substantially reduced fuel costs when compared to diesel ■ CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel ■ FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada ■ QUIET: 10 decibels more quiet than a diesel truck WITTKE™ CNG: EFFICIENCY AND RELIABILITY ■ Integrated roof mounted design, 4 or 5 tanks, 60 to 75 DGE* ■ Innovative placement of guard covers, delivering complete & easy access ■ Lightest CNG frontloader in the industry for maximum legal payload * other setups available (up to 97DGE) ALTERNATE OPTION #1 PREMIUM PRODUCTS COME WITH PREMIUM SUPPORT. Labrie is committed to delivering the ultimate ownership experience throughout North America. Our pursuit of excellence continues long after a Leach™, Labrie™ or Wittke™ is put into service. OUR NORTH AMERICAN NETWORK IS QUALITY DRIVEN: ■ Labrieplus 24/7 customer support system, provides quality replacement parts, premium hands-on ﬁ eld and live assistance. Peace of mind guaranteed. ■ A network of over 45 premium distributors located throughout the United States and Canada are highly trained to assist you; providing live assistance from a dedicated staff of professional representatives to support all of our Leach™, Labrie™ and Wittke™ products. Visit www.labriegroup.com to view a complete listing of our premium distributor network 1 National Account Manager San Luis, Sonora, Mexico Ontario, California Oshlosh, Wisconsin Quebec City, Canada PARTS LaFayette, Georgia Over 60 Premium Distributor Locations 7 Regional Sales Managers 7 Field Service Representatives 2 Technical Advisors / Demo Operators ALTERNATE OPTION #1 BODY CONSTRUCTION STARLIGHT SUPERDUTY Body Walls (Curved One Piece)1/8" (3.2 mm)175,000 psi (Hardox 450)0,156" (4.0 mm)175,000 psi (Hardox 450) Body Roof (Curved One Piece)1/8" (3.2 mm)175,000 psi (Hardox 450)0,156" (4.0 mm)175,000 psi (Hardox 450) Body Floor (Curved One Piece)0,156" (4.0 mm)175,000 psi (Hardox 450)3/16" (4.8 mm)175,000 psi (Hardox 450) Canope 12 GA 50,000 psi 12 GA 50,000 psi Body Total Capacities (Tailgate & Hopper Included)32, 34, 36, 38, 40, 42 & 44 yd³38, 40, 42 & 44 yd³ HOPPER CONSTRUCTION STARLIGHT SUPERDUTY Hopper Floor (Flat One Piece)3/16" (4.8 mm)175,000 psi (Hardox 450)1/4" (6.4 mm)175,000 psi (Hardox 450) Hopper Walls (Curved One Piece)0,156" (4.0 mm)175,000 psi (Hardox 450)3/16" (4.8 mm)175,000 psi (Hardox 450) Access Door (Hinged with upper & lower locks)0,156" (4.0 mm)175,000 psi (Hardox 450)3/16" (4.8 mm)175,000 psi (Hardox 450) Top Door 14 GA STD (10 GA optional)50,000 psi 14 GA STD (10 GA optional)50,000 psi PACKER CONSTRUCTION STARLIGHT SUPERDUTY Type Full Eject Full Eject Upper Face Plate (One Piece)0,156" (4.0 mm)175,000 psi (Hardox 450)0,156" (4.0 mm)175,000 psi (Hardox 450) Lower Face Plate 1/4" (6.4 mm)175,000 psi (Hardox 450)1/4" (6.4 mm)175,000 psi (Hardox 450) TAILGATE CONSTRUCTION STARLIGHT SUPERDUTY Curved Face 1/8" (3.2 mm)175,000 psi (Hardox 450)0,156" (4.0 mm)175,000 psi (Hardox 450) Slide-In Rubber Seal Height (Seal on tailgate, Not on Body, No Tailgate Vertical Move Open or Close)37" (940.0 mm)STD 37" (940.0 mm)STD Latches Hydraulic latches on both sides Hydraulic latches on both sides Tailgate Capacities 2, 4 & 6 yd³2, 4 & 6 yd³ ARMS CONSTRUCTION STARLIGHT SUPERDUTY Steel 1/4" (6.4 mm) & 1/2" (12.7 mm)100,000 psi 1/4" (6.4 mm) & 1/2" (12.7 mm)100,000 psi Lifting Capacity 8,000 lbs STD (10,000 lbs optional) 8,000 lbs STD (10,000 lbs optional) FORKS CONSTRUCTION STARLIGHT SUPERDUTY Steel 1,0" (25.4 mm)100,000 psi 1,5" (38.1 mm)100,000 psi HYDRAULICS STARLIGHT SUPERDUTY Operating Pressure 2,500 psi 2,750 psi STD Pump Gear Type 54 GPM @ 1500 RPM Gear Type 54 GPM @ 1500 RPM Directional Valve Parker, 5 Sections with Air Actuator Parker, 5 Sections with Air Actuator Packer Controls In Cab STD Packer Controls (Stop, Pack, Retract & Eject)In Cab STD Packer Controls (Stop, Pack, Retract & Eject) Arms/Forks Controls In Cab STD Twinstick (Joystick optional)In Cab STD Twinstick (Joystick optional) Hydraulic Tank Capacity Aluminum, chassis mount, 60 Gallons Aluminum, chassis mount, 60 Gallons Return Filter In Tank Return Filter In Tank Return Filter Oil Level Gauge Mounted on Tank Mounted on Tank CYLINDERS STARLIGHT & SUPERDUTY Packer BODY SIZE (Body + Hopper)STAGES SIZE 30 yd³ Body (Body + Hopper) 3 5-1/2" x 4-1/2" x 3-1/2" 34 yd³ Body (Body + Hopper) 3 5-1/2" x 4-1/2" x 3-1/2" 38 yd³ Body (Body + Hopper) 3 5-1/2" x 4-1/2" x 3-1/2" Packer Cylinders Force STARLIGHT 118,800 lbs SUPERDUTY 130,700 lbs Top Door 2-1/2" Bore 2-1/2" Bore Forks 3-1/2" Bore 3-1/2" Bore Arms 4-1/2" Bore 4-1/2" Bore Tailgate 2-1/2" Bore 2-1/2" Bore CYCLE TIMES 1500 RPM STARLIGHT & SUPERDUTY Packer 19 - 24 sec Eject 32 - 34 sec Arms 11 - 14 sec Forks 3 - 5 sec Top Door 11 sec WITTKE™ BODY DIMENSIONS 40 cu. yd. (31 m3 ) A Overall Length (Arms/Forks Up, Travel Position)292-3/16" (7,422 mm) B Overall Length (Arms/Forks Down)461" (11,709 mm) C Overall Height Above Chassis (Arms/Forks Up, Travel Position)118" (2,997 mm) D Overall Width *101" (2,565 mm) E Tailgate Length 49-7/16" (1256 mm) I Hopper Opening Length *91" (2,311 mm) J Hopper Opening Width *80" (2,032 mm) K Overall Length (Tailgate Raised, Arms/Forks Up, Travel Position)322-1/4" (8,185 mm) L Overall Length (Tailgate Raised, Arms/Forks Down)491" (12,471 mm) M Hopper Access Door Height 36-13/16" (935 mm) N Hopper Access Door Width 26-7/16" (672 mm) O Overall Height Above Chassis (Tailgate Raised, Arms/Forks Up, Travel Position)176-13/16" (4,491 mm) Q Overall Height Above Chassis (Arms/Forks Down)109-1/2" (2,781 mm) * Not shown on drawing A K B L E O Q C N M C M Y CM MY CY CMY K bom wittke final.pdf 1 2014-04-24 16:34:04 Visit www.labriegroup.com to view a complete listing of our premium distributor network 1 National Account Manager San Luis, Sonora, Mexico Ontario, California Oshlosh, Wisconsin Quebec City, Canada PARTS LaFayette, Georgia Over 60 Premium Distributor Locations 7 Regional Sales Managers 7 Field Service Representatives 2 Technical Advisors / Demo Operators ALTERNATE OPTION #1 15 3 1 2 1 / 11 - 2 1 - 2 0 1 6 LABRIE ENVIROQUIP GROUP Labrie Enviroquip Group is one of the largest manufacturer’s of refuse and recycling collec-tion vehicles in North America. Our product lines of Labrie, Leach, and Wittke are renowned to be the most reliable, e cient, productive, and innovative in the solid waste industry today. Throughout our history, we have been recognized for the design and production of the highest quality vehicles available on the market, while our customers beneﬁ t from a single trusted source of engineering expertise. At Labrie we continually push the boundaries of innovation to provide a greener, safer, smarter and more efficient way of waste management and collection. We are committed to building and delivering the ﬁ nest refuse collection equipment in the industry to suit all of your collection needs. With the strongest dealer network in the industry (over 45 distribution points across the continent), our stock and demo program, engineering expertise, and the Labrieplus 24/7 customer support center, Labrie delivers the ultimate ownership experience. Labrieplus is Labrie’s full service customer support center located in the U.S. Its mission is to provide quality replacement parts and premium hands-on field support to Labrie equipment owners. Labrieplus is the single source for Labrie, Leach, Wittke and Pendpac OEM and selected all makes of parts. Labrie is certiﬁ ed ISO 9001-2008 and attests to the quality of these products. Labrie has made every reasonable e ort to ensure that the information contained in this brochure is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify designs, characteristics and products at any time. Contact Labrie for prices and options or to obtain the phone number of your local Labrie distributor. For the most recent version of our spec sheets, please go to Labrie website at www.labriegroup.com. In case of discrepancy, the Web version takes precedence over any printed literature. © Labrie Enviroquip Group 2014. - Printed in USA Labrie (Head O ce) 175-B, route Marie-Victorin, Levis, Quebec, Canada G7A 2T3 Toll free: 800 463-6638 Phone: 418 831-8250 Fax: 418 831-5255 info@labriegroup.com www.labriegroup.com PARTS Enviroquip Parts 1198 Shattuck Industrial Bvld, Lafayette, GA, 30728 Phone: 706-638-2467 Toll free: 800 231-2771 Fax: 706-639-9275 www.labrieplus.com www.partseq.com ALTERNATE OPTION #1 Standard Limited Product Warranty Subject to the other provisions hereof, LABRIE ENVIRONMENTAL GROUP, hereinafter called “Labrie” warrants that all new Labrie products (the “Product”) shall be free of defects in material and workmanship under normal use and service for a period of ONE (1) YEAR after delivery to the first registered customer/end-user. WITHOUT LIMITATION TO THE OTHER PROVISIONS HEREOF, THIS PRODUCT WARRANTY DOES NOT COVER: - Any and all components or parts of the Product, including without limitation the vehicle chassis, which are not manufactured and installed by Labrie, whether or not they are covered by an original manufacturer’s or supplier’s warranty; - Paint; - Damages resulting from abuse, misuse of the Product or from negligence or accidents; - Damages resulting from use of the Product other than for its intended purpose or in a manner other than its intended normal use and service; - Damages caused by improper maintenance of the Product including, without limitation, failure to comply with the maintenance requirements set forth in the Product’s Parts and Maintenance Manual; - Damages caused by the operation of the Product with parts or components known by the customer/end-user to be defective or in need of maintenance; - Parts, components or systems which have been modified without the express authorization of Labrie or of an authorized Labrie distributor; - Repairs which are not completed or otherwise expressly authorized by Labrie or an authorized Labrie distributor; - Repairs or modifications which have been authorized by Labrie or an authorized Labrie distributor that are performed by personnel which is not qualified to perform such repairs or modifications; - Normal wear item parts including, without limitation, oils, fluids, filters, tracks, rollers, wear shoes, tailgate seals, chains, divider blades and normal wear of the steel structure; - Any and all adjustments and maintenance resulting from normal use and service of the products. For the purposes of this warranty, normal use and service means the operation of the new Product for fifty (50) hours per week for its intended purpose and in compliance with the operation and maintenance instructions which are provided by Labrie in the Product’s operation and maintenance manuals. It is the customer/end-user’s responsibility to make sure that all operators are familiar and comply with the operation manual and the warning decals on the Product. In the event a part or component of the Product fails or becomes defective during the warranty period and, in the opinion of Labrie, such failure or defect results from Labrie’s material or workmanship, the part or component shall be repaired or replaced by Labrie or an authorized distributor at no cost provided that the unit is brought to an authorized distributor’s service facility. However, the aforementioned repair or replacement of parts or components may be performed by the customer/end-user as provided herein if specifically authorized by Labrie or an authorized Labrie distributor. Because the Product is engineered to work only with genuine Labrie parts and components, this warranty shall be void and of no effect if i) the Product is modified other than by Labrie or by an authorized Labrie distributor or other than in accordance with a specific authorization and instructions from Labrie or from an authorized Labrie distributor or ii) if parts and components of any other manufacturer are used as substitutes for genuine Labrie parts and components. Standard Product Warranty PL2012 - 05092012 53 ALTERNATE OPTION #1 Standard Limited Product Warranty LABRIE MAKES NO WARRANTY AS TO MERCHANTIBILITY, FITNESS FOR USE, LEGALITY OF OPERATION IN ANY JURISDICTION OR ANY IMPLIED WARRANTY OF ANY KIND OR NATURE. LABRIE SHALL NOT BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE. NO OTHER PERSON, FIRM, CORPORATION, INCLUDING THE LABRIE DISTRIBUTOR, CAN BIND LABRIE TO ANY WARRANTY OTHER THAN THIS WARRANTY OR OTHERWISE MODIFY SAID WARRANTY. Labrie reserves the right to redesign and/or discontinue the manufacture of parts, components, and Products. This limited warranty may be transferred to subsequent end-users within fifteen (15) days of the Product transfer provided that Labrie is notified in writing within the said fifteen (15) day period. Standard Product Warranty PL2012 - 05092012 54 ALTERNATE OPTION #1 Alternate Option #2 Curbtender Titan w/ Peterbilt 520 11L $404,237.00 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 ALTERNATE OPTION #2 701 PERFORMANCE DRIVE | CEDAR FALLS, IA 50613 PHONE: (319) 266-1721 | FAX: (319) 266-8207 © 2024 Curbtender, Inc. All Rights Reserved. Specifications subject to change.www.curbtender.com TITAN Armed For Success High Compaction Heavy Duty ALTERNATE OPTION #2 www.curbtender.com Body Capacity 40yd3 44yd3 A. Body Length 309”318” B. Length of Body to Tailgate Raised 375”375” C. Height of Body Above Chassis Frame 111”111” D. Height of Tailgate Raised Above Chassis Frame 195”195” E. Length of Body With Arms Down W/ Forks Stowed 423”433” F. Length Of Body With Arms Down W/ Forks Extended 470”480” G. Height Above Chassis Frame Arms Up W/ Forks Stowed 121”121” H. Height Above Chassis Frame Arms Up W/ Forks Extended 179”179” J. Appx. Overall Length (Rear Tailgate To Chassis Front Bumper)398”407” Hopper Capacity 12yd3 12yd3 Body Weight 17,360 LBS.17,720 LBS. BODY SPECIFICATIONS Standard Performance • Pack Panel Cycle: 25 Seconds • Full Ejection of Packed Material: 31 Seconds• Arm Cycle: 16 Seconds• Tailgate Opening: 16 Seconds• 1,000 LBS./yd3 Compaction Body Construction • Body Sides:10 Gauge ASTM 715-80• Body Roof: 10 Gauge ASTM 715-80• Body Curved Floor: 3/16” Hardox 450• Hopper Sides: 3/16” Hardox 450• Hopper Floor: 1/4” Hardox 450• Tailgate Construction: 10 Gauge ASTM A715-80 • Hopper Wind and Front Screen• Sliding Doors (32”)• Full Eject Design• Cab Shield With Hinged Extension• Roof Access Ladder (Curbside) Packing Panel • Lower Face: 1/4” 100,000 PSI • Upper Face: 3/16” ASTM A715-80100,000 PSI Arms and Forks • Bolt-On Arms, Load Rated 8,000 LBS. (4.5” Cylinders)• Torque Tube Bearings: (4) Split Bearings Blocks w/ Bronze Bushings Bushings • Forks: ASTM A514 at 1 ½” x 43” Long Forks• Automatic “Up Arm” Deceleration Valve Hydraulics • Air Over Hydraulic Controls • Pump: 55 GPM @ 1,500 RPM• Reservoir Capacity: 50 Gal.• Suction Strainer: 100 Mesh• Return Filter: 10 Micron• System Working Pressure: 2,500 PSI Max• Under Body Hydraulic Valves• Pump Fluid Stop Blocks Standard Optional Features • Body Sides: 7 Gauge or 1/8” Hardox• Residential, Short, Or Long Forks• Residential Carry Can• 10,000 LBS. Load Rated Arms• “Cardboard Special” Package – 6.25” Bore Pack Cylinders 701 PERFORMANCE DRIVE | CEDAR FALLS, IA 50613 PHONE: (319) 266-1721 | FAX: (319) 266-8207 © 2024 Curbtender, Inc. All Rights Reserved. Specifications subject to change. A C D E F H B G J Minimum GVWR 66,000 LBS.66,000 LBS. Front Axle 20,000 LBS.20,000 LBS. Rear Axle 46,000 LBS.46,000 LBS. Cab to Trunnion 210”210” MINIMUM CHASSIS REQUIREMENTS FRONT LOADERTITANALTERNATE OPTION #2 STANDARD NEW EQUIPMENT 1 YEAR LIMITED WARRANTY This Warranty is Non-Transferable Revised 11/2017 Curbtender, Inc. (“CURBTENDER”) warrants that the goods purchased (the “Unit”) shall be free from defects in material and workmanship under normal use for a period one year from the date of sale, beginning when the Unit is delivered to the initial owner (the “Warranty”). Warranty shall be approved only when proper service and maintenance are performed as described and required in CURBTENDER Service Bulletins and CURBTENDER Operator, Service and Parts manuals and the then current CURBTENDER Warranty Policy and Procedures are followed. Failure to comply with the then current CURBTENDER Warranty Policy and Procedures may, at CURBTENDER’s discretion, invalidate this Warranty in its entirety or invalidate any individual warranty claim. This Warranty is expressly limited to the repair or replacement of any component or part that is proven to CURBTENDER’s satisfaction to have been defective in material or workmanship. Such components or parts shall be repaired or replaced without cost. Curbtender’s warranty does not include “wear items” such as (but not limited to) bearings, bushings, steel liners, guide shoes, belts, pins, etc. Any service parts sold by CURBTENDER shall carry a ninety (90) day limited warranty for replacement only (labor is not included), provided that a factory inspection reveals a material or workmanship defect. CURBTENDER reserves the right to make changes in the design or make additions to or improvements on its product without creating any obligation for installation in previously manufactured units. THE WARRANTY SET FORTH HEREIN IS THE SOLE AND EXCLUSIVE WARRANTY BEING GIVEN BY CURBTENDER WITH RESPECT TO THE UNIT AND ANY RELATED PARTS OR PRODUCTS AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGMENT ARE HEREBY DISCLAIMED. THE REMEDIES PROVIDED IN THIS WARRANTY ARE THE EXCLUSIVE REMEDIES AVAILABLE AND ARE LIMITED TO REPAIR AND REPLACEMENT OF THE NONCONFORMING PARTS. IN NO EVENT, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING BUT NOT LIMITED TO NEGLIGENCE, PRODUCT LIABILITY, OR STRICT LIABILITY, SHALL CURBTENDER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFITS, PRODUCTS, DOWN TIME, COVER, TEMPORARY REPLACEMENT COST OR ANY OTHER DIRECT, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING ATTORNEY’S FEES. IN NO EVENT SHALL CURBTENDER BE LIABLE FOR ANY LOSS, DAMAGE, CLAIM, COST OR EXPENSE, INCLUDING ATTORNEY’S FEES, ARISING FROM OR RELATED TO ANY LEAK OR SPILL OF HYDRAULIC FLUID OR ANY HAZORDOUS MATERIAL (AS DEFINED UNDER ANY APPLICABLE FEDERAL, STATE, OR LOCAL STATUTE, REGULATION OR THE LIKE) OR THE FAILURE TO PROPERLY DISPOSE OF HYDRAULIC FLUID OR ANY HAZORDOUS MATERIAL. OWNER AGREES TO DEFEND AND HOLD CURBTENDER HARMLESS FROM ANY LOSS, DAMAGE, CLAIM, COST OR EXPENSE, INCLUDING ATTORNEY’S FEES, ARISING FROM OR RELATED TO ANY ENVIRONMENTAL OR HAZORDOUS MATERIAL CLAIM. THIS WARRANTY IS CONTINGENT UPON AND APPLICABLE ONLY IF THE THEN CURRENT CURBTENDER WARRANTY POLICY AND PROCEDURES ARE COMPLIED WITH. OTHER THAN THE PURCHASE OF AN EXTENDED WARRANTY, NO EMPLOYEE OR REPRESENTATIVE OF CURBTENDER IS AUTHORIZED TO MODIFY THIS WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY. THIS IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED BY CURBTENDER. ALTERNATE OPTION #2